nanoFramework.Iot.Device.Bmxx80 1.2.474

The ID prefix of this package has been reserved for one of the owners of this package by NuGet.org. Prefix Reserved
dotnet add package nanoFramework.Iot.Device.Bmxx80 --version 1.2.474
NuGet\Install-Package nanoFramework.Iot.Device.Bmxx80 -Version 1.2.474
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package.
<PackageReference Include="nanoFramework.Iot.Device.Bmxx80" Version="1.2.474" />
For projects that support PackageReference, copy this XML node into the project file to reference the package.
paket add nanoFramework.Iot.Device.Bmxx80 --version 1.2.474
#r "nuget: nanoFramework.Iot.Device.Bmxx80, 1.2.474"
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package.
// Install nanoFramework.Iot.Device.Bmxx80 as a Cake Addin
#addin nuget:?package=nanoFramework.Iot.Device.Bmxx80&version=1.2.474

// Install nanoFramework.Iot.Device.Bmxx80 as a Cake Tool
#tool nuget:?package=nanoFramework.Iot.Device.Bmxx80&version=1.2.474

BMP280/BME280/BME680 Device Family

BMxx80 is a device family that senses temperature, barometric pressure, altitude, humidity and VOC gas.

SPI and I2C can be used to communicate with the device (only I2C implemented so far).

Documentation

The implementation supports the following devices:

  • BMP280 temperature and barometric pressure sensor (Datasheet)
  • BME280 temperature, barometric pressure and humidity sensor (Datasheet)
  • BME680 temperature, barometric pressure, humidity and VOC gas sensor (Datasheet)

Usage

BME280

Important: make sure you properly setup the I2C pins especially for ESP32 before creating the I2cDevice, make sure you install the nanoFramework.Hardware.ESP32 nuget:

//////////////////////////////////////////////////////////////////////
// when connecting to an ESP32 device, need to configure the I2C GPIOs
// used for the bus
Configuration.SetPinFunction(21, DeviceFunction.I2C1_DATA);
Configuration.SetPinFunction(22, DeviceFunction.I2C1_CLOCK);

For other devices like STM32, please make sure you're using the preset pins for the I2C bus you want to use.

// bus id on the MCU
const int busId = 1;
I2cConnectionSettings i2cSettings = new(busId, Bme280.DefaultI2cAddress);
using I2cDevice i2cDevice = I2cDevice.Create(i2cSettings);
using Bme280 bme80 = new Bme280(i2cDevice)
{
    // set higher sampling
    TemperatureSampling = Sampling.LowPower,
    PressureSampling = Sampling.UltraHighResolution,
    HumiditySampling = Sampling.Standard,

};

// Perform a synchronous measurement
var readResult = bme80.Read();

// Note that if you already have the pressure value and the temperature, you could also calculate altitude by using
// var altValue = WeatherHelper.CalculateAltitude(preValue, defaultSeaLevelPressure, tempValue) which would be more performant.
bme80.TryReadAltitude(defaultSeaLevelPressure, out var altValue);

Debug.WriteLine($"Temperature: {readResult.Temperature?.DegreesCelsius:0.#}\u00B0C");
Debug.WriteLine($"Pressure: {readResult.Pressure?.Hectopascals:0.##}hPa");
Debug.WriteLine($"Altitude: {altValue.Meters:0.##}m");
Debug.WriteLine($"Relative humidity: {readResult.Humidity?.Percent:0.#}%");

BMP680

// The I2C bus ID on the MCU
const int busId = 1;

I2cConnectionSettings i2cSettings = new(busId, Bme680.DefaultI2cAddress);
I2cDevice i2cDevice = I2cDevice.Create(i2cSettings);

using Bme680 bme680 = new Bme680(i2cDevice, Temperature.FromDegreesCelsius(20.0));

// reset will change settings back to default
bme680.Reset();

// Perform a synchronous measurement
var readResult = bme680.Read();

// Print out the measured data
Debug.WriteLine($"Gas resistance: {readResult.GasResistance?.Ohms:0.##}Ohm");
Debug.WriteLine($"Temperature: {readResult.Temperature?.DegreesCelsius:0.#}\u00B0C");
Debug.WriteLine($"Pressure: {readResult.Pressure?.Hectopascals:0.##}hPa");
Debug.WriteLine($"Relative humidity: {readResult.Humidity?.Percent:0.#}%");

BMP280

// bus id on the MCU
const int busId = 1;

I2cConnectionSettings i2cSettings = new(busId, Bmp280.DefaultI2cAddress);
I2cDevice i2cDevice = I2cDevice.Create(i2cSettings);
using var i2CBmp280 = new Bmp280(i2cDevice);

// set higher sampling
i2CBmp280.TemperatureSampling = Sampling.LowPower;
i2CBmp280.PressureSampling = Sampling.UltraHighResolution;

// Perform a synchronous measurement
var readResult = i2CBmp280.Read();

// Print out the measured data
Debug.WriteLine($"Temperature: {readResult.Temperature?.DegreesCelsius:0.#}\u00B0C");
Debug.WriteLine($"Pressure: {readResult.Pressure?.Hectopascals:0.##}hPa");

You also have 3 examples on how to use this device binding are available in the samples folder.

The following fritzing diagram illustrates one way to wire up the BMP280 with an MCU like ESP32 using I2C:

ESP32 Breadboard diagram

General:

Bmp280 MCU
Vin Power pin
GND Ground

I2C:

Bmp280 MCU
SCK I2C clock pin
SDI I2C data pin

Connection Type

The following connection types are supported by this binding.

  • I2C
  • SPI
Product Compatible and additional computed target framework versions.
.NET Framework net is compatible. 
Compatible target framework(s)
Additional computed target framework(s)
Learn more about Target Frameworks and .NET Standard.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories (2)

Showing the top 2 popular GitHub repositories that depend on nanoFramework.Iot.Device.Bmxx80:

Repository Stars
dotnet/samples
Sample code referenced by the .NET documentation
nanoframework/Samples
🍬 Code samples from the nanoFramework team used in testing, proof of concepts and other explorational endeavours
Version Downloads Last updated
1.2.474 130 1/24/2024
1.2.462 155 1/5/2024
1.2.458 130 12/20/2023
1.2.456 99 12/13/2023
1.2.442 195 11/15/2023
1.2.436 99 11/10/2023
1.2.416 119 11/8/2023
1.2.403 188 10/6/2023
1.2.396 170 9/27/2023
1.2.384 181 9/6/2023
1.2.378 148 8/16/2023
1.2.369 191 8/2/2023
1.2.363 125 7/28/2023
1.2.357 120 7/19/2023
1.2.354 175 7/14/2023
1.2.345 154 6/21/2023
1.2.341 120 6/14/2023
1.2.337 160 6/7/2023
1.2.335 107 6/2/2023
1.2.329 119 5/26/2023
1.2.316 152 5/16/2023
1.2.313 121 5/12/2023
1.2.308 146 5/11/2023
1.2.302 122 5/10/2023
1.2.297 138 5/3/2023
1.2.273 293 3/17/2023
1.2.267 252 3/10/2023
1.2.263 220 3/8/2023
1.2.259 267 2/27/2023
1.2.256 216 2/24/2023
1.2.253 207 2/22/2023
1.2.222 340 1/9/2023
1.2.217 294 1/6/2023
1.2.215 258 1/6/2023
1.2.212 276 1/5/2023
1.2.210 300 1/4/2023
1.2.208 270 1/3/2023
1.2.203 295 12/28/2022
1.2.159 377 11/14/2022
1.2.157 324 11/9/2022
1.2.155 329 11/6/2022
1.2.153 335 11/5/2022
1.2.141 397 10/25/2022
1.2.128 385 10/22/2022
1.2.125 389 10/12/2022
1.2.87 488 9/15/2022
1.2.66 395 9/4/2022
1.2.63 394 9/3/2022
1.2.47 421 8/15/2022
1.2.40 435 8/6/2022
1.2.38 431 8/5/2022
1.2.28 444 8/1/2022
1.2.13 454 7/24/2022
1.2.10 418 7/23/2022
1.1.147.4251 506 7/8/2022
1.1.145.58726 414 7/7/2022
1.1.135.7416 443 7/1/2022
1.1.133.52556 449 6/30/2022
1.1.123.24311 440 6/27/2022
1.1.121.35854 414 6/26/2022
1.1.116.8772 455 6/24/2022
1.1.113.2032 433 6/23/2022
1.1.109.32999 456 6/16/2022
1.1.102.51394 412 6/15/2022
1.1.99.36719 411 6/14/2022
1.1.97.17326 427 6/13/2022
1.1.92.53000 456 6/8/2022
1.1.75.16702 440 6/1/2022
1.1.72.29765 433 5/31/2022
1.1.67.25390 441 5/27/2022
1.1.64.21380 423 5/26/2022
1.1.59.7661 439 5/24/2022
1.1.58.10097 435 5/23/2022
1.1.54.28879 423 5/23/2022
1.1.44.45306 463 5/6/2022
1.1.40 452 5/5/2022
1.1.11 490 4/19/2022
1.1.3 486 4/15/2022
1.1.1 429 4/14/2022
1.0.300 507 3/31/2022
1.0.288-preview.114 117 3/25/2022
1.0.288-preview.113 109 3/25/2022
1.0.288-preview.104 100 3/22/2022
1.0.288-preview.103 100 3/21/2022
1.0.288-preview.100 107 3/19/2022
1.0.288-preview.99 119 3/18/2022
1.0.288-preview.98 102 3/18/2022
1.0.288-preview.95 114 3/15/2022
1.0.288-preview.93 104 3/15/2022
1.0.288-preview.87 112 3/10/2022
1.0.288-preview.86 128 3/8/2022
1.0.288-preview.77 123 2/27/2022
1.0.288-preview.75 112 2/26/2022
1.0.288-preview.65 168 2/18/2022
1.0.288-preview.63 111 2/16/2022
1.0.288-preview.61 118 2/12/2022
1.0.288-preview.58 121 2/10/2022
1.0.288-preview.53 113 2/9/2022
1.0.288-preview.48 137 2/4/2022
1.0.288-preview.41 130 1/31/2022
1.0.288-preview.29 128 1/28/2022
1.0.288-preview.20 134 1/27/2022
1.0.288-preview.19 124 1/27/2022
1.0.288-preview.18 130 1/27/2022
1.0.288-preview.5 130 1/24/2022
1.0.288-preview.1 118 1/21/2022
1.0.272 492 1/10/2022
1.0.259 492 12/9/2021
1.0.258 316 12/7/2021
1.0.164 912 9/9/2021
1.0.157 347 9/4/2021
1.0.154 309 8/30/2021
1.0.153 335 8/14/2021
1.0.151 332 8/6/2021
1.0.146 343 7/22/2021
1.0.138 360 7/18/2021
1.0.136 384 7/17/2021
1.0.135 153 7/16/2021
1.0.134 162 7/15/2021
1.0.133 177 7/14/2021
1.0.131 176 7/8/2021
1.0.130 474 7/6/2021
1.0.129 158 7/6/2021
1.0.127 171 7/5/2021
1.0.126 170 7/5/2021
1.0.125 181 7/5/2021
1.0.122 210 6/30/2021
1.0.121 193 6/29/2021
1.0.120 182 6/29/2021
1.0.119 217 6/28/2021
1.0.118 223 6/20/2021
1.0.111 181 6/14/2021
1.0.110 227 6/9/2021
1.0.109 155 6/8/2021
1.0.106 193 6/1/2021
1.0.104 237 5/29/2021
1.0.103 201 5/28/2021
1.0.97 172 5/28/2021
1.0.90 176 5/27/2021
1.0.64 165 5/26/2021
1.0.19 213 5/21/2021